Expert Answers about Trailer Hitch Lock

• Can Reese Trailer Hitch Locks Be Ordered With Specific Key
• There isn't a way to get a Reese hitch lock with a specific key number on it, so the best we can offer are new, keyed-alike trailer hitch locks, depending on if you need a standard hitch receiver lock, a trailer coupler surround style lock, or a trailer coupler latch-style lock. You would just need to select the "Keyed Alike" option on the product page. Trailer Hitch Receiver Lock: - Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 - Trailer Hitch Receiver Lock for 2" and 2-1/2"...
  view full answer...


• Replacement for Trailer Hitch Receiver Lock With Missing Cover
• I can certainly understand just wanting to replace one part of your trailer hitch receiver lock, but those locks do not have replacement parts, so you are going to have to replace the entire lock. The correct one is going to depend on the size of your hitch. - 1-1/4" Trailer Hitch Receiver: etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 - 2" Trailer Hitch Receiver: etrailer Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitches # e98880 - 2-1/2" Trailer Hitch...
  view full answer...


• Trailer Hitch Lock to Secure Ball Mount to Trailer Hitch Receiver
• From what I can tell it sounds like you are needing a hitch lock to secure your ball mount to your trailer hitch receiver to replace the pin. We do have that, with the right one just depending on the size of your trailer hitch: - 1-1/4" Hitch Receiver: Trailer Hitch Receiver Lock # e98879 - 2" Hitch Receiver: Trailer Hitch Receiver Lock # 1480DAT - 2-1/2" Hitch Receiver: Trailer Hitch Receiver Lock # 1469DAT - 3" Hitch Receiver: Trailer Hitch Receiver Lock # 34061074-D
  view full answer...


• Can the Lock Clip be Removed from the Hitch Cover to Use a Trailer Hitch Receiver Lock
• You will be able to remove the locking clip on the St. Louis Blues Hitch # OHCC014.I attached a video of the clip being removed and inserted on the same hitch cover, but with a different logo you may find helpful. The Trailer Hitch Receiver Lock with Flush Design for 2" Trailer Hitches # e98882 will work with this hitch cover. The hitch cover pin holes are designed to be as large as the hitch pin holes, so locks similar to this one can fit in the hitch. The base of the hitch cover is...
  view full answer...


• Can The Trimax Locks And Etrailer Hitch Lock Be Keyed The Same?
• No, the keys from the hidden hasp locks would not work on the trailer hitch lock. We do not have a way to key those alike since they are a different brand. The # TMX73FR does come with 3 keyed alike locks. If you were to order a 5/8 hitch lock like the # e98881, it would come with a different key.
  view full answer...


• Does Hitch Pin Lock Have a Normal Use
• There is not necessarily a specific lifespan that can be counted on with hitch lock like your Blue Ox Trailer Hitch Receiver Lock for 2" Hitches # BX8858. If it gets used heavily and a lot of stress on it then a lock can wear down quicker than those that are used somewhat sparingly, but less than a year old is not a lot of time for the issues you are having. There are hitch locks for a 2" hitch that have warranties, such as the Trailer Hitch Receiver Lock # e98880 and Bulldog Lifelong...
  view full answer...


• Does Draw-Tite Hitch Receiver Lock Have a Weight Capacity
• Hitch receiver locks such as the Draw-Tite Hitch Receiver Lock - Extra Long - Flush Design # BD580412 don't actually have a specific weight capacity so they can be used for whatever capacity your other equipment is rated for. The reason for this is because the lock is positioned inside the hitch, which means the downward force of the tongue weight isn't on the lock, it is on the ball mount, hitch ball, receiver and coupler. This is why no trailer hitch locks or trailer hitch pins are rated...
  view full answer...


• Can the Bulldog Locking Hitch Pin # BD580402 be Keyed to Match Key # LB011
• I spoke with my contact at Bulldog and she told me that the Bulldog Trailer Hitch Lock, # BD580402, could not be keyed to match key number LB011. This lock is not available keyed alike. If you would like hitch locks that can be keyed alike and that can be keyed alike in the future, I recommend looking at the etrailer Trailer Hitch Receiver Lock, # e98882. This lock also uses a solid stainless steel pin and works with 2 inch Class III and Class IV trailer hitches.
  view full answer...


• Can etrailer Coupler Locks and Hitch Locks of Different Sizes be Keyed Alike
• Yes, you can get all of those etrailer hitch and coupler locks keyed alike. What you need to do is order each of the locks at the same time and use the "Keyed Alike" option and each of the locks will have the same key: - etrailer Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitches # e98880 - etrailer Trailer Coupler Lock - 2" Span # e98886 - etrailer Trailer Coupler Lock for Surge Brake Couplers with 3-3/8" Span # e98888 - etrailer Trailer Coupler Lock - 7/8" Span # e98889 I...
  view full answer...


• Is Bulldog Lifelong Trailer Hitch Lock # BD580402 for 2-Inch Hitches Considered Universal
• The Bulldog Lifelong Trailer Hitch Lock # BD580402 for 2-Inch Hitches is a general-purpose 5/8-inch diameter hitch lock intended for standard 2 x 2-inch trailer hitch receivers. It is not described as a universal-fit item though it will fit the majority of 2-inch receivers with the exception of some factory hitches that have an outside width greater than 2-1/2-inches. Bulldog describes this a Lifelong lock due to its stainless steel construction and reliable ball-bearing lock mechanism. The...
  view full answer...


• Is There a Locking Threaded Hitch Pin Available to Holt the Receiver in the EcoHitch 306-X7365?
• With the bolt in question being 5/8-11 by 4 inches long, we do not have a threaded locking pin available. However, you could drill a 1/4" hole in the threaded end of the bolt and then use the Tow Ready Trailer Coupler Lock # 3008 in the drilled hole. This isn't the most elegant solution, but will work.
  view full answer...


• Can Weight Distribution Hitch Get Locked to Trailer & Lock For Trailer
• So for a weight distribution hitch like the Equal-i-zer # EQ37100ET, you'll take it off when you get to your destination, and what a lot of people do is separate the arms and the head unit and put them in whatever storage they have available, or their tow vehicle. There isn't a way to lock the a WDH to the trailer, which is why it gets taken apart and off. Then you can use a standard coupler lock for your trailer like the Master Lock Heavy-Duty Coupler and Latch Lock Combo for 1-7/8",...
  view full answer...


• Are Locks Included Wtih Curt Trailer Hitch Receiver and Coupler Lock Set C23086 Keyed Alike
• Within each set, the 3 different locks would be keyed alike. If you needed similar locks that are keyed differently, we offer some etrailer.com branded locks that would work great for you. etrailer Trailer Flat Lip Trailer Coupler Lock for 1-7/8 or 2 inch balls # e98897 etrailer Adjustable Trailer Coupler Latch Lock # e98883 etrailer Trailer Hitch Receiver Lock # e98880
  view full answer...


• Keyed Alike Trailer Hitch Lock For 1-1/4 Inch Hitch
• A 1/2 inch diameter trailer hitch lock is for a 1-1/4 inch hitch, and you can get four of them keyed alike with the following: - Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 On the product page there is a drop down that you can select "Keyed Alike" and you're set.
  view full answer...


• Can The Let's Go Aero Anti-Rattle Trailer Hitch Receiver Locks Be Ordered Keyed Alike
• The Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 and others with this same design unfortunately do not come with a keyed alike option so you would have to get regular hitch pin locks that can be keyed alike, like the etrailer # e98882 (2-5/8") or # e98881 (3-5/8"), and then use an anti-rattle hitch stabilizer like part # e99007.
  view full answer...


• Cable Lock And Anti-Rattle Hitch Lock for Saris Hitch Mounted Bike Racks
• We sure do have the part you are looking for. The Saris Cable lock And Anti-Rattle hitch Lock is part # SA984. This kit helps secure the carrier to the trailer hitch and also the bikes to the carrier.
  view full answer...


• Can Multiple Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches Be Ordered with Same Key
• The Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches part # 63232 does not have a keyed alike option so if multiple are ordered, you could get different sets of keys. We don't have any options like the above with a keyed alike feature unfortunately.
  view full answer...


• How to Get etrailer Coupler & Hitch Locks Keyed Alike
• You can get those locks all keyed alike, but there isn't a set with all three together. Instead, what you'd do is go to the product pages of each, and on those product pages there is a drop-down box that says "Keyed Alike?" and you'd select the keyed alike option for each lock: - etrailer Trailer Hitch Receiver Lock for 2" Hitches # e98880 - etrailer Surge Brake Coupler Lock - 2-1/2" Span - 1/4" Diameter # e98887 - etrailer Trailer Coupler Latch Lock - 7/8" Span - 1/4" Diameter # e98890 When...
  view full answer...


• Can Bulldog Hitch Lock For 2 Inch Hitch be Keyed Alike
• The Bulldog Lifelong Trailer Hitch Lock for 2" Hitches # BD580402 cannot be keyed alike. I know that's not what you wanted to hear so please don't be mad at me, and I can give you an option that can be keyed alike if you want to go that route. What you can use instead that you can order keyed alike is the Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel # e98882.
  view full answer...


• Can BOLT Trailer Hitch Receiver Locks Be Re-Keyed or Have a New Key Cut to Use Them
• Unfortunately, you can't. The BOLT Trailer Hitch Receiver Lock # BL7023585 that you have is permanently code to only 1 specific vehicle/key. They cannot be re-coded or re-keyed, the locks will only work with the original vehicle/key. Unfortunately, you would need to get new locks that are compatible with your new vehicle.
  view full answer...